Order number: | 911010075 |
Brand: | HELVAR |
Type / Description: | Elektronick předřadník T5, KLD ( 80) W |
Jmenovité napětí (V): | 220-240 |
Jmenovitý proud: | 0,34-0,32 |
Nominal wattage: | 1 x 80 |
Changes to data are subject to prior notice. NBB Bohemia s.r.o. accepts no responsibility for damages caused by inaccurate interpretation of the content on this site.
More photos available
Technical drawing not available
Wiring Diagram not available
Specifications | EL1x80ngn5 |
Model/Description | Elektronický předřadník T5 |
Finish | Nestmívatelný/Non dimmable |
Brand/Manufacturer | HELVAR |
Lamp type | T5 linear |
Degree of protection (IP) | IP00 |
Dimmable | Ne |
Nominal voltage (V) | 220-240 V |
Dimmable by conventional dimmers | Ne |
Název položky | HELVAR EL 1x80 ngn 5 |
Type of start | Instant |
Output frequency of ballast (driver) | >40 kHz kHz |
Maximum length of wires between the lamp and ballast | 2 m mm |
Operating frequency | 50 - 60 Hz |
Working temperature of the ballast body -Tc max | 75 °C °C |
Maximum permitted storage temperature | -40…+80 °C °C |
Heat protection | Ano |
Protection against damage during power failure | Ano |
Protection against overvoltage | Ano |
Cooling Type | Vzduchem/Air |
Burning position | Universal |
Total Harmonic Distortion | <10% % |
Type of control gear | Elektronický/Electronic |
Ambient temperature | -20…+50 °C |
Number of maximal switching cycles | >50.000 |
The rate of premature failures | <1% % |
Turn-on time | -1,0 s s |
Energy Efficiency Index | A2 |
Lamp Power factor (PF) | 0,98 |
Nominal wattage | 1 x 80 W |
Rated power (W) | 74,8-80,0 W |
Operating voltage (V) | 198-264 VAC, 176-280 VDC V |
Endurance | 320 VAC, 1 h V |
Type of Voltage | AC/DC |
Maximal output voltage (V) | 400 V V |
Direct connection to the mains | Ano |
Nominal current (A) | 0,34-0,32 A |
Dimensions (mm) | 280 x 30 x 21 mm |
Packing method | 10 - 1 |
Spacing of fixing holes | 270 mm mm |
Weight netto | 200 g g |
Insulation class | Tř I. Ochranným vodičem |
Safety instructions | www.nbb.cz |
LSF after 1.000 hrs | 99,99 % % |
LSF after 50.000h | 90,0 % at tc % |