PLUTO 150 MH/SO 240V 1,80A KVG ASYMETRIC RX7s IP65

Order number: 912045010
Brand: NBB
Type / Description: výbojkové svítidlo ASYMETRIC
Jmenovité napětí (V):230 - 240
Jmenovitý proud:0,305
Nominal wattage:150
Unit EAN13 code: 8595209921857

Exclusion of liability

Changes to data are subject to prior notice. NBB Bohemia s.r.o. accepts no responsibility for damages caused by inaccurate interpretation of the content on this site.

Notice
This product ranks among electrotechnical products powered by mains voltage 230-240V. For safety reasons, it is recommended that the assembly, connection or disassembly be carried out by a person with an appropriate electrotechnical qualification. Please note that the product may only be put into service with original covers, otherwise there may be a risk of electric shock, especially from the terminal block. Only use the product in places that are suitable for this purpose; do not use products intended for indoor use only in the outdoor environment. When installing or dismantling an emergency luminaire, we recommend disconnecting the power supply otherwise there may be a risk of electric shock. Observe the prescribed position when operating the product and how it is attached. Only connect the product to the rated voltage, or load it only to the maximum permitted power. Install only light sources for this type of luminaire. The manufacturer can not be held responsible for damages resulting from inappropriate connection, connection to an unsuitable distribution system, or damage resulting from the use of an unsuitable light source. Observe the operating values ​​on the label. Do not expose the product to inappropriate weathering or high temperatures unless it is expressly stated that the product is intended to be operated under these conditions. When installing, wiring or disassembling, follow the generally accepted safety precautions.


NOTICE:
The emergency luminaire is energized even after disconnecting the power supply due to its own charged batteries. Therefore, it is recommended that the installation and disassembly be carried out only by a person with the appropriate electrotechnical qualifications.

Do not throw the emergency luminaire into the mixed waste after use. Take it to the nearest store, collection yard, or other designated location for free recycling. You can also deliver the used luminaires for recycling at our sales outlets. Emergency lights and modules contain a rechargeable battery. You can find the list of collection points on the Retel and Ekolamp Collective Systems pages.

More photos available

Technical drawing not available


Download

Technical sheet

Technical sheet PLUTO 150 MH/SO 240V 1,80A KVG ASYMETRIC RX7s IP65


Wiring Diagram not available


General information

Model/Description Výbojkové svítidlo
Finish Průmyslové
Brand/Manufacturer NBB
Material Aluminium
Lamp type MH nebo sodíková výbojka
Degree of protection (IP) IP65
Dimmable Ano
With light sensor Ne
Suitable for suspended mounting Ne
Lamp type MH výbojka
Nominal voltage (V) 230 - 240 V
Degree of protection (IP) IP65
Suitable for number of lamps 1
Suitable for wall mounting Ano
Suitable for traverse mounting Ne
Suitable for pedestal/floor mounting Ano
Suitable for light-track mounting Ne
Suitable for clamp-mounting Ne
Suitable for ceiling mounting Ne
Dimmable by conventional dimmers Ne
Název položky PLUTO 150 MH/SO 240V 1,80A KVG ASYMETRIC RX7s IP65

Working conditions

Operating frequency 50 - 60 Hz
Light source is part of the fixture Ne
Hot restart Ne
Burning position Libovolná
Typical Hot Restart Time 5 min
Installation height (m) 3 - 10 m
Installation on flammable surfaces Ano
Application Všeobecné osvětlování
Suitable for through-wiring Ne
Lamp holder type RX7s
With movement sensor Ne
Type of control gear Magnetický
Ambient temperature 40 °C
Fire resistance "D" Ano
Type of dimming Nestmívatelné

Physical characteristics

Dimensions (mm) 416 x 266 x 132 mm
Packing method 1
Spacing of fixing holes 110 mm
Width 266 mm
Reflector Vysoce leštěný
Colour housing Černá
Weight netto 4100 g
Length 416 mm
Height/depth (mm) 132 mm
Material housing Aluminium
Impact strength IK10
Type of surface Matný
Adjustability Vertikálně

Additional information

With lamp Ne

Safety information

Insulation class Třída I
Safety instructions www.nbb.cz
Protection class Ochranným vodičem

Electrical characteristics

Capacity of the Capacitor 28 µF
Nominal wattage 150 W
Rated power (W) 150,0 W
Capacitor needed to be used Ano µF
Operating voltage (V) 220 - 240 V
Type of Voltage AC
Pulse height 5 kV
Lamp operating current 1,80 A
Voltage type AC
Suitable for lamp power 150 W
Nominal current (A) 0,305 A
System power 165 W
Total power (W) (light fitting) W

Mounting methods/application

Mounting method Upevňovací třmen
Mounting method Přisazená

EuP Parameters

Luminaire maintenance factor 1,0
Bulb type (size) for which is the luminaire designed. Čirá
The rate of premature failures <1 %
Turn-on time 180 s

Lighting characteristics

Light sharing Asymetrické
Radiation angle Široký úhel
Beam angle Degrees (°) 110 °

Energetic characteristics

Energy Efficiency Index B2
Lamp Power factor (PF) 0,99